Sand Processing Equipment Designed for Heat Exchange Between Sand Particles and Cooling Pipes Using Circulating Water Systems

1. Product Overview
The sand temperature regulator uses circulating water to cool or heat the sand material by ensuring full contact between the sand particles and the pipes inside the cooler, allowing for heat exchange to complete the cooling or heating task.

2. Components
The sand temperature regulator consists of several cooling sections, equipped with flow regulation plates and manual shut-off plates. Each cooling section contains multiple drainage pipes. The sand, after being air-classified, flows evenly through these cooling pipes, allowing it to cool down. The flow regulation plate consists of two layers of perforated plates, and the sand flow is controlled by adjusting the misalignment of the plates. The entire system uses automated control and is equipped with temperature sensors. After cooling, the sand temperature is fed back to the control center via the sensors for intermittent discharge.

3. Parameters

Production rate: ≥20~40T/h

Circulating water volume: 40~100 m³/h

Water pressure: 0.2-0.4Mpa

Cooling steel pipe: φ25×3

4. Main Functions and Advantages

Main Functions:

Reduce sand temperature to ensure molding quality

Stabilize production rhythm and improve efficiency

Pre-mix sand and homogenize temperature

Core Advantages:

Improve casting quality

Increase production efficiency

Heat energy recovery and environmental protection

Controllable automation

Stable and reliable operation

Zibo Tongpu Vacuum Equipment Co., Ltd. is located in the industrial machinery manufacturing base of China, the hometown of QlLU culture----.Gaoqing economic development zone, Zibo city of Shandong province.

Zibo Tongpu is a professional manufacturer that specialized in lost form and V-method casting equipment and all kinds of vacuum pumps. Here brought together a large number of science and technology workers at lost form and V-method casting for many years that have the rich experience. They are not only proficient in lost form and V-method design and manufacture of theoretical knowledge, but also have rich practical experience. So the equipment's new design could be more close to the users, more in line with the actual needs.

Zibo Tongpu founded in 2005, for the user to manufacture a number of lost form and V-method production lines successively. Including fully-automatic and semi-automatic production lines, but also tailored to the user's simple production line. Our products have a broad market, covering more than twenty provinces, cities and autonomous regions across in China. At the same time, exported to Thailand, South Korea, Taiwan, Vietnam, Indonesia, and Kazakhstan, Russia and so on countries and regions.

Zibo Tongpu has strong technical development and technology service capabilities. We can provide not only reliable casting equipment, but also lost form and V-method molding technology service. Meanwhile, we also undertake "turn-key" projects, according to customers’ demand. Besides, we have set up a foundry plant which adopts the lost form and V-method molding technique as main means of production so as to provide test base for customers to carry out first-phase product testing and stuff training. We provide a variety of services to need of customers at different levels.

We can willing to provide you our best and most sincere service! Let us join hands and work together for common development and growing. and achieve even greater glory. 

Zibo Tongpu can offer the following services:

One, Product trial: In the experimental base can be carried out with the early production development, to form a complete product technology and economic parameters report.

Two, Engineering design: Can provide the most optimized engineering design, the most reasonable process, the most economical investment costs, the most economical running costs

Three, Pre-sale service: Timely provide the prefect technical and business consulting, free to the field survey, technical communication with customers, and Professional design according to customer's requirement.

Four, Sale service: At the same time of equipment manufacture, responsible for the relevant personnel of the technical training, provide perfect technology solution, to ensure the project on schedule.

Five, After-sales service: have regular review system, listen to customer Suggestions. Establish customer service files, provide free lifetime technical support. No matter inside and outside the warranty period the received information respond immediately.