UV 310nm SMD 5050 LED Lamp

Specification of UV 310nm SMD LED

Dimension of 310nm UV LED Lamp




Electrical Characteristics (Ta=15°C, If= 20mA)

Normalized Radiant flux I-V

Other Remarks

1.Don’t touch the LED’s face in case breaking wires down; Oil on hand also absorbs deep UV! Always use tweezers and wear gloves during manual installation and wear eye protection during DUV LED operation.

2.Use constant-current source specifically designed for DUV LEDs. Failure to properly re-adjust visible LED drivers will lead to severely damaged DUV LED, or shorten their usable life.

3.DUV LEDs must not be allowed to operate without heat-sink.Always use good thermal compound to attach the backside of LEDs to the heat-sink,and taking care to avoid air bubbles in the thermal compound. The P8D series in our company has been connected to heat dissipation.

4.In consideration of the low reverse voltage and sensitive electric property, the reverse voltage would be high and the wires or the dies would be broken down if the anode and the cathode being used in the wrong way. Please do recognize the anode and cathode when using the DUV LEDs.

5.Deep UV is harmful to your eyes, please do not watch closely or watch in a long time and do not observe through magnifying glass and microscope.

6.Contact us if there’s any question; We wouldn’t be responsible for any serious result that caused by private operation.

Brighter Optoelectronics Co., Ltd. was established in 2007 and offer a broad spectrum of LED strip lighting, LED light bulbs, LED Flood lights and other LED lighting solutions for residential, commercial and industrial applications. We scour the globe for best-in-class LED lighting products and distribute them from our headquarters in Shenzhen, China.

All the engineers from Brighter have strong electronics designing and project installation experience. Some of them have been with LED research more than 10 years.

We test our products in our own laboratory and determine which products are best recommended for specific applications. Our sales engineers are trained and educated in every system of lighting we provide, and will work with you from design through installation to make sure you have a smooth launch.

We primarily serve lighting designers, architects, electrical contractors, original equipment manufacturers and other businesses and professionals. We also serve consumers.