Name: Hall Encoder Dc Worm Gear Motor 180rpm 24V Dual Phase 12W With Self Lock
Brand: SECORE
Price: 1 USD

Hall Encoder Dc Worm Gear Motor 180rpm 24V Dual Phase 12W With Self Lock

Categories	DC Worm Gear Motor
Brand Name:	SECORE
Model Number:	SC370-WG4632
Certification:	CE ROHS
Place of Origin:	Shenzhen
MOQ:	100
Price:	Negotiated The Price
Payment Terms:	T/T, D/A
Supply Ability:	100000pcs per month
Delivery Time:	10-12 working days
Packaging Details:	100pcs per carton or as request
No-load speed:	180rpm
No-load current:	150mA
Rated voltage:	24V
continuous current:	0.16A
Loaded Speed:	130rpm
Rated torque:	6.5kg.cm
loaded current:	700mA
Stall torque:	12kg.cm
Stall current:	2A
Power:	max 12W
encoder resolution:	775 ppr
application:	Smart home applicance

Contact Now

Add to Cart

Product Details
Company Profile

Hall Encoder Dc Worm Gear Motor 180rpm 24V Dual Phase 12W With Self Lock

Factory Supply DC24V Dual Phase Hall Encoder DC Worm Gear Motor With Self-Lock Function

Electrical specification:

Motor type: Brush commutated DC worm gear motor with encoder

DC 24.0V 12W
Reducer	Ratio	1:i	1:32	1:65	1:158	1:200	1:337	1:564	1:1019
Reducer	Size L	mm	L46W32H21.5
No Load	Speed	rpm	375	181	74	60	36	20	12
No Load	Current	A	0.15	0.15	0.15	0.15	0.15	0.15	0.15
Rated load	Speed	rpm	264	130	54	43	25	15	8
	Torque	Kgf.cm	3.2	6.5	6	7.5	13	20	30
	Current	A	0.7	0.7	0.7	0.7	0.7	0.7	0.7
Stall	Torque	Kgf.cm	≥5.9	≥12	NO STALL & no higher than 35kg.cm
Stall	Current	A	≤2	≤2	≤2	≤2	≤2	≤2	≤2
Resolution	Resolution	PPR	352	715	1738	2200	3707	6204	11209

Mechanical parameters:

Provide motor size, working voltage, no-load conversion, no-load current, load, stall current, etc, TO TAILOR YOUR MOTOR.

Motor Use Needs to know>>

1. When you use the motor, there should be no binding objects. For example, the adhesive should not flow into the bearing through the rotating shaft, which will hinder the operation of the motor.

2. The rotation of the shaft may have the opposite effect on the life of the motor. In order to extend the life, please check whether your load conforms to the regulations.

It should not be overloaded, or there are items that hinder rotation at the end of the shaft.

3. Do not store in surrounding high temperature or extreme humidity, and do not place in corrosive gas, which will reduce the effect of the motor.

4. Do not run the motor in the surrounding high temperature and humidity

5. When soldering is required on the positive and negative motor terminals of the power supply, the temperature of the soldering iron should be 340℃±40℃, and the heating time should be within 3 seconds.

6. Don't let the motor shaft get stuck. When power is supplied, the motor will overheat in a short time and its accessories might be burned.

7. Due to the lack skills of the staff, the quality of the motor cannot be guaranteed when the motor encounters the things mentioned in the manual, or the superficial judgment is obviously fault.

8. Supply the specified power and be sure that it is within the range of measurable requirements.

9. The installation of pulleys or gears should not be abnormally aggravated when pressed in

10. When installing the motor, if the screw is too long, it will cause contact between the motor itself and the rotor, which will affect the characteristics.

Product Tags:


*From:	Your email address is incorrect!
*To:	Shenzhen Secore Technology Co.,Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Hall Encoder Dc Worm Gear Motor 180rpm 24V Dual Phase 12W With Self Lock

Hall Encoder Dc Worm Gear Motor 180rpm 24V Dual Phase 12W With Self Lock

Hall Encoder Dc Worm Gear Motor 180rpm 24V Dual Phase 12W With Self Lock

Hall Encoder Dc Worm Gear Motor

180rpm Dc Worm Gear Motor

12W Dual Phase Gear Motor

Hall Encoder Dc Worm Gear Motor 180rpm 24V Dual Phase 12W With Self Lock