Categories | Temperature Test Chamber |
---|---|
Brand Name: | SINOWON |
Model Number: | QTL-80A |
Certification: | CE |
Place of Origin: | DONGGUAN/CHINA |
MOQ: | 1 Set |
Payment Terms: | T/T, L/C |
Supply Ability: | 40 Sets per Month |
Delivery Time: | 20 - 30 Days |
Packaging Details: | Plywood Box |
Heating System: | Stainless steel radiating heater |
Refrigerant: | Refrigerant R404A |
Radiator: | Fin type radiator |
Compressor: | Air cooling hermetic compressor |
Refrigerating Method: | Mechanical cascade refrigeration system |
Temp. Range: | -70 Deg C to 150 Deg C |
Programmable temperature test chamber with wide range of
temperature controls is mainly used to test performances of
materials after in high temperature, low temperature, constant
temperature or temperature alternating.
It is one of the essential test equipments for aerospace,
automotive, home appliances, scientific research department, etc.
QTL Series Products Conform Following Standards:
※ IEC60068-3-5-2002 Environmental testing-Part 3-5 Support
documentation and guidance-Confirmation of the performance of
temperature chambers
※ IEC68-2-1 (GB-2423.1-2008) Testing A: Low temperature testing
method
※ IEC68-2-2 (GB-2423.2-2008) Testing B: High temperature testing
method
※ MIL-STD-202F (GJB360.8-87) High temperature life testing
※ MIL-STD-810D (GBJ150.3) High temperature method
※ MIL-STD810D (GBJ150.4) Low temperature method
※ IEC68-2-3 (GB2423.3-93) Testing Ca: Constant moist heat testing
method
※ IEC68-2-30 (GB2423.4-93) Testing Db: Alternate moist heat testing
method
※ MIL-STD-810D (GJB150.9-93) Moist heat testing method
Specifications:
Control Mode | Balanced Temperature Control System | |
Operating Temp. & Humid. Range | +5℃ ~ +35℃; <85%R.H. | |
Temp. Range | A=0℃, B=-20℃, C=-40℃, D=-70℃ ~ +100℃(150℃) | |
Temp. Fluctuation | ±0.5℃ | |
Temp. Uniformity | ≤2.0℃ | |
Temp. Resolution | 0.01℃ | |
Temp. Heating Time | -40℃ ~ +150℃within 35 min; -70℃ ~ +150℃within 60 min | |
Temp. Cooling Time | 20℃ ~ -40℃within 60 min; 20℃ ~ -70℃within 90 min | |
Power Supply | AC380V, 50/60HZ, Three-phase (Specified by User) | |
Material | Exterior Material | Stainless steel with baking paint |
Interior Material | SUS304# Stainless steel | |
Insulation Material | Rigid polyurethane foam | |
Refrigeration System | Refrigerating Method | Mechanical cascade refrigeration system |
Compressor | Air cooling hermetic compressor | |
Radiator | Fin type radiator | |
Refrigerant | Refrigerant R404A | |
Heating System | Stainless steel radiating heater | |
Controller | Touch screen controller HL-1000 | |
Safety Devices | Overheat protector Switch | |
Accessories | Viewing window, Chamber lamp, Cable port ø50mm, |
Note: 1. The performance values are no specimen inside the test
area
2. At 20℃ ambient temperature, rated voltage
3. According to IEC68-2-1 and IEC68-2-2
4. The above specifications are for reference only.
Chamber Dimensions:
Model | Interior Dimension | Exterior Dimension | Interior Volume |
QTL-80A/B/C/D | 400 × 500 × 400mm | 930 × 1310 × 810mm | 80L |
QTL-150A/B/C/D | 500 × 600 × 500mm | 1030 × 1410 × 910mm | 150L |
QTL-225A/B/C/D | 500 × 750 × 600mm | 1080 × 1620 × 1120mm | 225L |
QTL-416A/B/C/D | 700 × 850 × 700mm | 1230 × 1660 × 1210mm | 416L |
QTL-800A/B/C/D | 1000 × 1000 × 800mm | 1530 ×1810 × 1310mm | 800L |
QTL-1000A/B/C/D | 1000 × 1000 × 1000mm | 1530 × 1810 × 1510mm | 1000L |
Features:
※ Heating/Cooling System: Completely independent heating/cooling
system can improve testing efficiency and using life.
※ Cycle System: Powerful blowing cycle system to avoid blind angle,
makes temperature and humidity evenly distributed in the test area.
※ Viewing window and interior light makes viewing workspace freely
and observe the test under best conditions.
※ Touch screen controller HL-1000 is designed to save chamber
programming and setup time with temperature limit and alarm to
protect your product.
※ Safety relay connection is provided to protect your device under
test by removing power to it when the chamber is not running.
※ RS-232 communications is for computer connection, programming can
be set on computer by software, monitor testing process and
automatically execute power on/off functions.
※ Chamber exterior material is stainless steel with environmentally
baking paint resists corrosion and provides impact resistance.
Interior material is SUS304# stainless steel with excellent heat
resistance and easy to clean.
※ Adjustable product shelf slides out for easier product access.
Shelf design is non-tipping and supports large product loads.
※ Left side of chamber with diameter 50mm cable port for power-on
test.