Home > Aquaculture Equipment >

ASTM B111 C7060X Copper Nickel Alloy Steel Tube, ASTM B111 / ASME SB11, Heat Exchanger / Condenser Application

Categories Copper Alloy Tube
Brand Name: YUHONG
Model Number: C70600 , C7060X ,CuNi 90/10
Certification: ABS, GL, DNV, NK, PED, AD2000, GOST9941-81, CCS, ISO 9001-2008
Place of Origin: China,
MOQ: 100KGS
Price: YUHONG HOLDING GROUP CO.,LTD
Payment Terms: T/T, L/C
Supply Ability: 1PC
Packaging Details: Ply-wooden Case /Iron Case/ Bundle with plastic Cap
Material: C70600 , C7060X ,CuNi 90/10
Standard: ASTM B111, ASTM B88, ASTM B288 , ASTM B688
Type of productis: seamless tube, welded tube , copper fitting , Copper fin tube
TPI: BV, SGS, IEI, MOODY, ....
  • Product Details
  • Company Profile

ASTM B111 C7060X Copper Nickel Alloy Steel Tube, ASTM B111 / ASME SB11, Heat Exchanger / Condenser Application


ASTM B111 C7060X Copper Nickel Alloy Steel Tube, ASTM B111 / ASME SB11, Heat Exchanger / Condenser Application


Detailed Product Description


Copper Nickel Pipes and Tubes | Cupro Nickel Pipes and Tubes

Cupro Nickel Tubes 90/10
This form of cupro nickel tubes produced by Tube Tech possess excellent resistance to corrosion by sea water as well as high resistance to erosion corrosion and air-impingement attack. The addition of iron results in 90/10 performing as good as 70/30 in salt water service heat exchangers. These tubes have good strength and ductility at ordinary temperatures and relatively high strength and other mechanical properties at elevated temperatures.
These cupro nickel tubes are widely used in condensers, coolers and heat exchangers where resistance to corrosion and erosion is paramount, yet maintaining a high thermal conductivity rate. To be used preferably in marine conditions. Forms a protective film which is multi-layered in flowing seawater. Resists marine bifouling.
These cupro nickel tubes are produced in a range of outside diameter, wall thickness various temper conditions to achieve the required mechanical properties and grain size. The mechanical and dimensional characteristics of our products satisfy the most demanding orders that require tight tolerances.
Cupro Nickel Tubes 70/30
Prosaic Steel supplies smooth bore 70/30 cupro nickel tubes of the highest standard, rigorously tested to make sure they are suitable for the exacting requirement of condensers and heat exchangers. These cupro nickel tubes have the highest resistance to stress-corrosion cracking. These tubes are available in a variety of outside diameter, wall thickness and tempers to meet the requirement. Superior dimensional control with specified mechanical properties offers trouble free performance and cost saving.

Standards
Cupro Nickel Tube90/ 10StandardBS2871part3ASTM B-111IS 1545JIS H 3300NFA 51 102
SymbolCN 102C 70600CuNi10Fe1C7060CuNi10Fe1Mn
Cupro Nickel Tubes 70/30StandardBS2871part3ASTM B-111IS 1545JIS H 3300NFA 51 102
NFA 51 102CN 107C 71500CuNi30Mn1FeC 7150CuNi30Mn1Fe

Dimensional Range
Outer Diameter - 4.00 to 22.00 mm
Wall Thickness - Between 0.15mm and 1.50 mm
Length upto 6 mtrs
End Applications

Heat Exchangers, Oil Coolers, Radiators, High Capacity Power Plants, Ship Building & Ship Repairs, Condensers, Offshore Oil rigs, Distiller Tubes, Evaporators, Ferrules etc.

Curpo Nickel Tubes 95/5 & 90/10 for Marine Application

These Cupro Nickel tubes & pipes for Marine application are very important for all Industrial fields. The company has experience in these areas and is able to supply these tubes in accordance with most international standards and special customer requirements.



Chemical Composition


Classi-
fication
Class

Chemical

Composition (%)

Related

Standards

CuZnPbFePSnNiMnAlAsOtherISSKSJISASTMBSDIN

Cu-

Ni Tube

1rem.1.00 max0.05 max1.3-1.7--4.8-6.20.3-0.8--IS:15
45
CuNi5
Fe
D 5301 C7040CuNi
95+5
7040
B 111
C70400
2871
CN101
1785
CuNi
5Fe
2rem.1.00 max0.05 max

1.0-

1.8

--

9.0-

11.0

1.0-

max

--IS:15
45 CuNi
10Fe1
C 7060CuNi
90:10
C 7060

C
70

600

CN

102

Cu

Ni
10

Fe

Mechanical Properties


Classi-
fication
TemperDesignationCu Alloy
UNS No.
Tensile Test
Outside diameter (mm)Thickness (mm)Tensile Strength Kgf/mm2Elongation (%)Yield Strength (kg/mm2)
Copper Nickel Tube061AnnealedC704005-250mm0.8-1027(260)9(85)
H55Light DrawnC704005-250mm0.8-1028(275)-21(205)
061AnnealedC706005-250mm0.8-1028(275)-11(105)
H55Light DrawnC706005-250mm0.8-1032(310)-25(240)

Cupro Nickel Tubes 90/10 for Heat Exchangers & Condensers
These Cupro Nickel tubes & pipes for Heat Exchangers & Condensers are very important for all Industrial fields. The company has experience in these areas and is able to supply these tubes in accordance with most international standards and special customer requirements.
Cupro Nickel Tubes 90/10 for Automobile Industries

The Move To Copper-Nickel Tubing
Copper had been proved since the early days to have many good attributes. It was easy to bend and had very high corrosion resistance, but there was concern about its low corrosion-fatigue strength. When copper-nickel was introduced, it displayed corrosion resistance similar to copper, higher general strength and better fatigue strength. Good formability allows ease of flaring and bending, and although the metal cost is greater than that of steel alternatives, copper-nickel is very attractive in view of its extra life, trouble-free installation and safety/reliability characteristics.

Properties of Copper-Nickel Brake Tubing
The copper-nickel alloy used for brake tubing typically contains 10% nickel, with iron and manganese additions of 1.4% and 0.8% respectively. The product conforms to ASTM B466 (American Society for Testing and Materials), which specifies dimensions, tensile strength and yield strength. Formability and internal cleanliness conform to specifications SAE J527, ASTM A254 and SMMT C5B (Society of Motor Manufacturers and Traders). Also, the alloy meets the requirements for pressure containment, fabrication and corrosion resistance for ISO 4038 (International Standards Organization) and SAE J1047.

Dimension Tolerance
MaterialUltimate Tensile Strength1000 psi (MPa)Yield Strength 0.5% Ext.under Load 1000 psi (MPa)YElongation % in 2 in.Fatigue Strength (10x7 cycles) 1000 psi (MPa)Burst Pressure* 1000 psi (MPa)
Copper-brazed Steel48-55 (0.330-0.380)28-34 (0.190-0.235)30-4030 (
0.210)
19.5
(0.135)
C12200-Phosphorus deoxidized Copper32-38 (0.220-0.265)10-14 (0.070-0.100)45-6010
(0.070)
12 (
0.083)
C70600-Copper Nickel 90-1048-54 (0.330-0.370)16-22 (0.110-0.150)40-5515
(0.100)
19 (
0.130)


Alloy C70600 is normally supplied as redrawn tubing in the annealed condition. The combination of strength and good ductility give excellent formability.
As copper-nickel is softer than steel, it was first feared that fretting might be a problem. Experience has shown this is not the case.

Corrosion Resistance
For many years prior to its application as a brake tubing material, alloy C70600 had been used in ships, power station condensers and hydraulic lines on tankers, and had displayed excellent resistance to saline conditions. Early tests revealed that copper-nickel has almost the same resistance to burst pressure as steel. In testing, however, when exposed to salt spray over 180 days, steel's burst strength decreases significantly. The copper alloy remains consistently resistant.
For tubes covered with a moist, salty mudpack for six months, brazed steel was severely corroded resulting in perforation of the tubing wall; whereas, only superficial general corrosion was found on the copper-nickel tubing. ISO 4038 and SAE J1047 include a corrosion resistance requirement referring to ISO 3768 asking for a minimum burst pressure of 110 MPa after 96 hours in neutral salt spray. Swedish requirements include a resistance at least equal to 25 of zinc. In all cases alloy C70600 easily exceeds the required corrosion resistance.

Copper-nickel brake tubing provides superior reliability and assures both manufacturers and vehicle owners improved durability for effective long-life functioning of the brake system.

Cupro Nickel Rods 90/10 and 95/5

Cupro Nickel Rods For 90/10

Chemical Properties
Pb0.05 Max.
Fe1.00 - 1.80
Mn1.00 Max.
Zn1.00 Max.

Cu + Ag Remainder Ni + Co 9.00 - 11.00

Mechenical Properties
Light Drawn
Flattening TestReqd. (After 'O')
U.T.S. ksi45.00 Min
Y.S. at 0.5% Ext. ksi35.00 Min.

Expansion Test 30% at 60 degree Reqd. (After 'O')

Annealed Temper
Flattening TestReqd.
Grain Size at 75 X mm Avg.0.010 - 0.045
U.T.S. ksi40.00 Min.
Y.S. at 0.5% Ext. ksi15.00 Min.

Expansion Test 30% at 60 degree Reqd.

Cupro Nickel Rods For 95/5

Chemical Properties
Sn0.10 Max.
Pb0.05 Max
Ni4.00 - 5.00
Fe0.10 Max.
Mn0.25 Max.
As0.10 Max.
Cu + Ag95.00 - 96.000
Sb0.01 Max.
Bi0.0025 Max.

Oxygen (O2) 0.08 Max.

Mechenical Properties
Annealed
U.T.S. MPa216 - 275 (Strip cut from Ring Tube)
%Elongation at 5.65Sq.Rt So G.L.40.00 Min. (Strip cut from Ring Tube)
Flattening TestReqd.
Bend TestReqd. (180 degree close)

Cupro Nickel Pancake Coils

Copper-nickel brake tubing provides superior reliability and assures both manufacturers and vehicle owners improved durability for effective long-life functioning of the brake system.Coils Available in 5 mtr, 10 mtr & 15mtrs.


Product Tags:

copper alloy pipe

  

copper nickel tube

  
Quality ASTM B111 C7060X Copper Nickel Alloy Steel Tube, ASTM B111 / ASME SB11, Heat Exchanger / Condenser Application for sale
Send your message to this supplier
 
*From:
*To: Yuhong Group Co.,Ltd
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You may also be interested in :
Inquiry Cart 0
Company Info
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Contact Us Quickly