Home > General Industrial Equipment >

Dew Point -40 Degree Nitrogen Generation Plant Psa Nitrogen Gas Generator

Categories PSA Nitrogen Generator
Brand Name: True
Model Number: TY300-99%
Certification: CE,ISO
Place of Origin: Jiangyin,Jiangsu China
MOQ: 1 set
Price: as negotiate
Supply Ability: 10 sets per month
Delivery Time: 30 days
Packaging Details: wooden case packing
Air compressor:: Equip
Removebale:: Yes
Purity:: 99%
Material:: Carbon,stainless steel
After service:: Yes
  • Product Details
  • Company Profile

Dew Point -40 Degree Nitrogen Generation Plant Psa Nitrogen Gas Generator

Mobile nitrogen purity 99% Dew point -40 degree 20 feet container type PSA nitrogen generator onsite

Application in oil-gas territory:

Now, nitrogen gas has been used widely in gas drilling of the oil-gas well, three times oil production operations, well completion, well repair, pressure upkeep and gas storage. And the inertia of nitrogen and the high pressured nitrogen can be in collecting gas and the sweep of piping system to prevent inflammable gas burning and the underground pipes of oil field being corroded.


GAS Drilling

Improve the Penetration Rate

Reduce or Avoid Leakage

Extend the Service Life of Drill

Decrease the Complex Hole Problems

Reduce Completions and Stimulations

Protect and Found Producing Formulation


Three drilling operation

Keep the Well Pressure

Injecting into Oil Well with Carbureted Hydrogen,Nitrogen Oil-driving

Holder-on Work, Improve the Productivity of Oil and Gas

Air-lift Operation, Avoid Drilling Trouble

Thermal Extraction to Increase Recovery Efficiency

The Heat Insulation Effect of Wellbore When Steam Huff and Puff

Control the Mud Density

Clean Oil Well

The Ideal Vector of Surfactant

Increase the Service Life of the Well


Characteristics:

1.N2 purity is accurate and reliable due to the result displayed online on numeric meter;
2.Furnish four-grade filters and drier to remove water,oil and impurity of compressed air to ensure N2 generator running smoothly and steady guarantee life achieve more than 10 years;
3.Furnish N2 outlet filter ensure nitrogen gas clear and purity which is sufficient suitable for foodstuff packing;
4.Reasonable N2 purity,can be adjusted from 95% to 99.9%;
5.Compact in frame, light in weight, steady in performance and facilitated in operation.
NumberName

Specification

and Type

ManufactureQuantityMain Technological Indexes
    Air Compressor Pry
      Screw air CompressorG355Atlas-Copco1 Set

      Rated Air Capacity:≥57Nm3/min

      Rated Pressure:0.8MPa

      Oil Content in Air:≤3ppm

      Air Temperature:≤Ambient Temperature +70-80℃

      Cooling Method:Air Cooling

      Power Rating:355KW

      Driving Mode:

      External Dimension: 4174*2120*2500mm

        Air Storage TankCG1/8TRUE GAS1 Set

        Rated Pressure:0.8Mpa

        Volume: 1m3

        Material:Carbon Steel

          Air Handling

            Three Level Filters


            CF006

            TF006

            AF006


            Italy ATS


            3 pieces

            Rated Pressure:1.0Mpa

            Connection Mode:DN25

            Rated Handling Flow:25 Nm3/min

            Air Quality After Filtration:

            Particulate≤0.01μm

            oil≤0.003ppm

            Filter Pressure Drop:≤0.2bar

            Filter of all levels of the configuration system shall be configured with timed electronic discharge valve and manual draining valve.

              Refrigeration DryerHF-25TRUE GAS1Set

              Rated Pressure:0.6-1.0MPa

              Rated Handling Flow:25Nm³/min

              Pressure Loss in the System:≤0.2bar

              Rated Inlet Air Temperature:≤50℃

              Outlet Air Dew Point Temperature :3℃

              Power Rating:4.5KW


                Connecting Pipeline and Valve

                /TRUE GAS1 Set

                Structure:Seamless Steel Tubes for Liquid Service

                Material:Carbon Steel of High Quality

                  skid-mounted nitrogen generator
                    Molecular Sieve3KT-172Japan1 Batch

                    Nitrogen Purity:≥99.9%

                    Capacity:300Nm³/h

                    Design Inlet Pressure:0.7Mpa

                    Design Operating Temperature:45℃

                    Maximum Operating Temperature:65℃

                      Absorption TowerXF-300TRUE GAS1 Set

                      Working Pressure:0.7Mpa

                      Material:Q235B

                      Design Pressure:0.8Mpa

                        PLCS7-200Siemens1 Set

                        Control Mode:PLC Control

                        Operating Voltage:24VDC

                        Output Form:Relay Output

                        All Components are Imported, Assembled to a Full Set Domestically

                          Pneumatic Valve

                          DN65

                          DN40

                          SKF

                          10 Pieces

                          6pieces

                          Start Mode:Pneumatic

                          Control Mode:Solenoid Valve

                          Material: Stainless 304

                            Solenoid Valve3v-210Taiwan AirTac8 Pieces
                              Nitrogen Gas AnalyzerP860-5NChang Ai1Piece

                              Measuring Range:78%~99.99%

                              Principle of Sensors: Ion Beam; Nitrogen Sensor

                              Measuring Mode: Gas Inlet

                                Nitrogen Buffer TankCG1/8TRUE GAS2 Piece

                                Rated Pressure: 0.8Mpa

                                Design Pressure: 0.84Mpa

                                Volume: 1 m3

                                Material: Carbon Steel

                                  Flow MeterLZB-25

                                  Changzhou Shuanghuan

                                  3Piece

                                  Rated pressure:1.0Mpa

                                  Diameter:DN40

                                    Craft Manifold,Valve/TRUE GAS1 Set

                                    Structure:Seamless Steel Tubes for Liquid Service

                                    Material:Carbon Steel of High Quality

                                      Skid-mounted/TRUE GAS1Set

                                      Structure: Steel Structure Base

                                      Material:Low-Carbon Steel

                                        Nitrogen Storage TankCG5/8TRUE GAS1Piece

                                        Rated Pressure:0.8Mpa

                                        Design Pressure:0.84Mpa

                                        Volume: 5m³

                                        Material: Carbon Steel

                                          Container20 feetTRUE GAS3 setsMaterial: Carbon steel
                                            Other Auxiliaries
                                              Finished Documents/TRUE GAS1 SetComplete Set of Equipment Data
                                                Accessories/TRUE GAS1 SetOriginal Supporting Equipment Accessories

                                                When the pressure rises, the carbon molecular sieve adsorbs the oxygen and produces the nitrogen gas. When the pressure decreases, the carbon molecular sieve starts to desorb the oxygen until the pressure equals to the ordinary pressure. At that time, the carbon molecular sieve desorbs the oxygen completely. The PSA nitrogen generator is usually equipped with adsorption towers. It controls the pneumatic valve by PLC, thus the two adsorption towers can produce the nitrogen gas alternatively. One tower adsorbs the oxygen and produces nitrogen gas, the other desorbs to regeneration to produces the required nitrogen.

                                                SMT nitrogen generator combines the features of lead-free soldering in SMT industry, nitrogen purity is generally between 99.9%~99.999%, the flow of nitrogen generator of each soldering furnace is generally between 10~30Nm3/hr (special specifications are calculated according to actual flow), the dew point is between -40℃~-60℃, and nitrogen pressure is between 0.5-0.6MPa. SMT dedicated nitrogen making solution can make the flux correct and active, reduce the residual amount of flux, enhance soldering quality and make the soldered surface more attractive.

                                                Technical Indicators

                                                Nitrogen flow: 0-2,000Nm3/h O2: ≤1ppm Dew point: ≤-70℃ Nitrogen purity: 99.99%-99.999%




                                                Quality Dew Point -40 Degree Nitrogen Generation Plant Psa Nitrogen Gas Generator for sale
                                                Send your message to this supplier
                                                 
                                                *From:
                                                *To: Jiangsu Tongyue Gas System Co.,Ltd
                                                *Subject:
                                                *Message:
                                                Characters Remaining: (0/3000)
                                                 
                                                You may also be interested in :
                                                Inquiry Cart 0
                                              • Haven't found right suppliers
                                              • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
                                              • And this service is free of charge.
                                              • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
                                              • Submit Buying Request
                                                Contact Us Quickly