Home > Disk Replication & Printing >

Hot Glue Melting A3 And A4 Binding Machine With Dual Rail Touch LCD Display

Categories A4 Binding Machine
Brand Name: Customized
Model Number: DB-60U
Certification: CE
Place of Origin: China
MOQ: 1
Price: Negotiation
Payment Terms: Western Union, T/T, L/C
Supply Ability: 500 units per month
Packaging Details: Strong export wooden package
Max. Binding Length: 420mm (A3 size)
Max. Binding Thickness: up to 7.5cm
Max. binding speed: 450 books/hour
Rail: Dual
Manual/Auto conversion: Yes
Glue melting time: 30 Mins
  • Product Details
  • Company Profile

Hot Glue Melting A3 And A4 Binding Machine With Dual Rail Touch LCD Display

A3 / A4 book binding machine, perfect book binding machine


High quality binding machine for book

Glue binding machine using common problems and solutions
One, out of the book binding, spine cover wrinkled how to do?
Solution: 1. Adjust the thickness of the cover, under normal circumstances, more than two hundred books is best to use the cover of more than 230g paper. 2 adjust the level of the platform facing surfaces, the home side platform appropriate to reduce, can be resolved. Similarly, if the spine is not binding books out side the home side the platform to increase the number can be solved.
Second, do not glue
Solution: a view plastic box of plastic is not too small, more than the minimum. 2 adjustment lever scraping gum, the gum scraping lowering the bar, increase the amount of glue, but not too large, when the glue is too large, there will be a large side glue, led directly to the side of the plastic overflow, affecting the appearance of books.
Third, the tire does not turn
Solution: a view plastic box does not turn the motor is not, to be replaced if the motor does not turn the motor. 2 viscose cause the chain to see whether the chain will not bend, such a case, replace the chain. 3 tire sleeve must be regularly refuel, make plastic axle adequately lubricated. 4 Replace the plastic when using glue to a certain extent, will be black rubber thickens, it needs to be replaced, be sure to pay attention to; try to use glue melting point of not more than 145 degrees.
Fourth, the car does not go
Solution: First, there are two check around limit sensors, detection methods, one to let the car go from left to right, in the car to the right half of the time limit sensor depressed, to see whether the car will stop, if it shows right would limit sensor no problem, let the car returned, pressing the left limit of the sensor in the return, the above, as the same thing, it shows the sensor no problem. 2 In the case of shutdown, according to the E key, boot into the first item, and then press the "cutter" button and let the car right away, when the car went head to see if there is a number from 0 on the display, if then press "paste head" key to return, when the car went to the left, the display shows the number 1, so that the sensor is no problem, or we need to replace the sensor.
Five, the car does not clamp
Solution: a first look at the lower part of the car if there is glue. If glue need to scrape gum, under normal circumstances can be solved. If not enough you need to check the car to open the trip switch and infrared sensors, if there are questions, you need to replace the sensor, if not on the need to replace the motor or the motherboard.
Six, clip surface station does not clip
Solution: First, enter the self-test program, the next turn to face the sensor detects clip, press the "paste head" key to see whether the clamping clip surface units, if the clamp on the press "Cutter" button to see if open, if you open the binding of the can. 2 If the above procedure does not work, then you need to check the motor and gear clamp surface units, if there are problems need to be replaced, otherwise the motherboard problem.
Seven, do not turn cutter
Solution: Check the fuse is burned out, the fuse next to the machine on the left side of the power cord has a black knob, open new ones insurance can, in general, the cutter motor is not bad, if does not work, then, is the problem the motherboard or SCR.
Eight, plastic boxes without heating or the temperature is too high
Solution: First check whether heating pipes or heating plate is heated, not heated thread must first check whether there are oxidized and, if please clean up. Check the temperature is too high a temperature controller, see the thread is loose, as loose the thread re-insert it, otherwise they need for a temperature controller.
Nine, slotting cutter too deep or too shallow
The solution: push the car to the right, then the next lock is loose on the set of the platform below the four screws, such as deep aboard a low profile milling, contrary to the high profile. (Must bring four corners transferred to a parallel line, otherwise there will be a deep one shallow)

Specifications

Item420mm wireless glue binding machine
Model noDB-60U
Max. Binding Length420mm (A3 size)
Max. Binding Thicknessup to 6.0cm
Max. binding speed450 books/hour
Book cover thickness70P-250P
RailDual
Working modeOne time from left to right
DisplayTouch LCD, code display+touch operation
Manual/Auto conversionYes
Clamping modeAutomatic detecting by magic eye
MillingSmall milling cutter+sun milling cutter
Glue melting time20 Mins
PowerAC220V (220V) 50HZ (60HZ) 1.2kw
Machine size1450mm×620mm×1100mm
Machine weight250kgs



DB-60U A3 Wireless glue binding machine, perfect book binding machine





DB-60U hardcover book binding machine

High quality binding machine for book
Note the use of glue binding machine:
1, to avoid the simultaneous operation of two machines;
2, please do not replace the cutter itself, to prevent the phenomenon of paper off the glue binding process.
3, cutter for when the action starts, but as usual wishing cutter cover is open, press the emergency stop button when;
4, plastic tank heated to high temperatures, the temperature of about 170-190 ℃, can not touch;
5, maintenance in order to avoid electric shock, unplug the plug;
6, when the hot melt adhesive reaches the bottom of the black line indicates the board, shall be added;
7, when added directly into the plastic glue tank, glue not exceed the top of the black line, so as not to overflow plastic tank outside cause parts damage.













































Quality Hot Glue Melting A3 And A4 Binding Machine With Dual Rail Touch LCD Display for sale
Send your message to this supplier
 
*From:
*To: Guangzhou Debo Machinery Mfg Co.,Limited
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You may also be interested in :
Inquiry Cart 0
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Contact Us Quickly