Home > Flanges >

Custom PCBA Board Wireless Charging Transmitter Coil Cell Phone Charger Pad

Categories SMT PCB Board
Brand Name: py
Model Number: Wireless charging solution PCBA
Place of Origin: china
MOQ: 1
Price: Negotiation
Payment Terms: L/C, T/T
Supply Ability: 1000/㎡/day
Packaging Details: box
Place Of Origin: China ShenZhen
Raw Material: FR4
Layer Count: 2-Layer
Board Thickness: 0.8-1.2mm
Copper Thickness: 1oz
Surface Finish: HASL Lead Free/HAL
Solder Mask: Blue
Silkscreen: White
Min. Hole Size: 0.25
Hole Wall Copper Thickness: ≥20μm
Min. Trace Width/Spacing: 0.075/0.075mm
Packaging: Inner: Vacuum-packed in soft plastic bales Outer: Cardboard Cartons with double straps
Application: Communication,automobile,cell,computer,medical
Advantage: Competitive Price,Fast Delivery,OEM&ODM,Free Samples,
Special Requirements: Buried And Blind Via, Impedance Control, Via Plug, BGA Soldering And Gold Finger Are Acceptable
  • Product Details
  • Company Profile

Custom PCBA Board Wireless Charging Transmitter Coil Cell Phone Charger Pad

Charging frequency100-200KHz
Output voltage5V
Output current500MA-1A
Output voltage19V
Power distance3-6mm
Electric energy transition≥70%
Receive electric current500-1000mAh adjustable
standard

QI and MFI



1, the input charging voltage: DC5VC5%.
2, the output voltage: DC5V
3, the input charging current: 1000MA.
4, the output current: 1000mA.
5, Total quiescent current is less than 100uA.
6. Key Description; Press shows the power and go into standby then you can charge the internal battery or an external power supply equipment, long press 3 seconds on / off LED flashlight.
7, no-load output 20 seconds automatically shut down.
8, LED indication; charging 4 LED battery indicator, fully charged lights, rechargeable lights flashing, after fully charged 4 lights lit LED indicator first a light flashing the first two lights flash first three lights flash Chapter 4 lights flash, the battery were25% 25% 50% 50% 75% 75% 100%.
9, protection: over charge protection, over-discharge protection, short circuit protection.
10, suitable for most use DC5V charging mobile phones, cameras and other digital products
11, can be customized mobile power board and product development programs and


Advantages
a) FR-4 Single sided PCB with competitive price.
b) RoHS compliant and suitable for thermal reliability needs,and Lead free assemblies with a maximum reflow temperature of 260℃.
c) Engineering design prevents problems from occurring in pre production.
d) DDU Door to door shipment with competitive shipping cost. You don’t need to arrange anything after confirming the order. Just wait for your PCB delivery to your hand.

More Applications in Electronics
Battery Charger
PLC
Wireless
RF
Wifi Router

Design for Manufacture (1)

Serial NO.ProcedureItemManufacturing capability
Large volume (S<100 m²)Middle volume (S<10 m²)Prototype(S<1m²)
1Inner layer(18um, 35um, 70um etc are finished copper. If not mentioned copper, finished 1oz is the default value )Min.isolation of layers0.1mm0.1mm0.06mm
2Min.track and spacing5/5mil(18um)4/4mil(18um)3/3.5mil(18um)
35/5mil(35um)4/4mil(35um)3/4mil(35um)
47/9mil(70um)6/8mil(70um)6/7mil(70um)
59/11mil(105um)8/10mil(105um)8/9mil(105um)
613/13mil(140um)12/12mil(140um)12/11mil(140um)
7Min.distance from drill to conductor4 Layer 10mil,6 layer 10mil,8-12 layer 12mil4 layer 8mil,6 layer 8mil,8-12 layer 10mil,14-20 layer 14mil,22-32 layer 18mil4 layer 6mil,6 layer 6mil,8-14 layer 8mil,16-22 layer 12mil,24-32 layer 14mil
8Min.width of annular ring on inner layer4 Layer 10mil(35um),≥6 Layer 14mil(35um)4 Layer 8mil(35um),≥6 layer 12mil(35um)4 Layer 6mil(35um),≥6 Layer 10mil(35um)
9Inner layer isolation ring width(Min)10mil (35um)8mil (35um)6mil (35um)
10Min.via pad diameter20mil (35um)16mil (35um)16mil (35um)
11Min. distance from board edge to conductor(no copper exposured)(inner layer)14 mil(35um)12 mil(35um))8 mil(35um)
12Maximum copper weight(Inner layer and outer layer)3 OZ( 105 um )4 OZ ( 140 um )6 OZ( 210 um )
13Core with different copper foil on both sides/18/35,35/70 um18/35,35/70 u

2oz (70um) Copper Double Sided HASL Lead Free PCB 1.6mm Thick Green Solder Mask Small Runs to Mass Production


Advantages


1. HASL has excellent wetting during component soldering and it can avoid copper corrosion

2. Save the cost of production: Production cost is one of the key points of our customers’ product competitiveness. Bicheng PCB have been striving to reduce its manufacturing cost from equipment introduce, worker training and technology improvement to increase their profitability. Customers are satisfied with our cost savings but without quality loss.

3. Great customer service

4. Customer complaint rate: <1%

5. Delivery on time: >98%


Applications


WiFi Card

Bluetooth Printer

Wireless Range Extender

Electric Motors

Tracking Device

Wireless Security System

Access Control

Data Logger

Intercom System

Surveillance System

Product Tags:

hdi circuit boards

  

universal pcb board

  
Quality Custom PCBA Board Wireless Charging Transmitter Coil Cell Phone Charger Pad for sale
Send your message to this supplier
 
*From:
*To: Ping You Industrial Co.,Ltd
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You may also be interested in :
Inquiry Cart 0
Company Info
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Contact Us Quickly