Home > Other Drive & Storage Devices >

Manual Dog Tag Embossing Machine For Military Army Use

Categories Card Personalization Machine
Brand Name: CNJACKY
Model Number: CNJ-5000
Certification: CE
Place of Origin: Hubei, China
MOQ: 1set
Price: Negotiable
Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram,Paypal
Supply Ability: 100 sets / month
Delivery Time: 1-15 days after payment
Packaging Details: Standard export carton packaging
Operation: By hand
Embossing position: Handle and sample card
Net size: 10kg
Gross size: 11kg
Applicable product: Dog Tag, Plastic Card, Paper Card
Packing Size: L400mm*W350mm*H250mm
Application: PVC Cards, Pet Tag, Solider ID Tag
Keyword: Embosser
  • Product Details
  • Company Profile

Manual Dog Tag Embossing Machine For Military Army Use

Manual Dog Tag Embossing Machine / Metal Tag Embosser For Military Army Use


Product introduction:


This manually operated dog tag embosser is the essential equipment of dog tag’s post production and processing. Its function is to extrude protruding or receding characters to make Dog tag with identifiability and uniqueness.

Our company natal" CNJACKY " Brand manual dog tag embosser are structure dependable, Orientation precisely, Cubage small, Appearance beautiful, Operation convenience. Fitting is used for troop, Pet shop, Materiel shop fabricates personal identification brand, Dog tag's usage.


Main Technical Parameters:


Applies workpieceNormative dog tag, That be 28.6 ×50.8 mm
Character-selectioncharacter rosette turnplate
Internal 52 code characters

Capitalization case of English letters (26): A~Z

Capitalization & Lower Arabic numerals (20):0~9

symbols (16): ﹐ .–﹙﹚~ @ * + ? ! “‵:

Adopting ISO international credit card special character.

Word spacing gap1/10inch
Operation mode

manual

Raised type lines

5 lines

Raised type location indication

indicator or sample card

Volume(L×D×H)

340×300×180 (mm)

Net weight of the machine8.8 kg

Drawing for the Machine:

Use of the Machine:


A,Preparation Work

1. Insert the handle (5) into the axle hole in the right of the machine, and screw on the fastening screw (6).


2. Pull the card framework (4) to the outermost, and put in the required card sample as needed.


3. Will need press printing's dog tag set free enter dog tag tray ( 7) In again be will dog tag tray ( 7) Sets free enter card framework ( 4) Head 's metal card groove in, Lightly go forward impel, Will be dog tag tray ( 7) Unders point set free enter card framework ( 4) Head card groove in.


B,word-selection positioning coding


1. Turn the code-selection plate (1), and turn the required imprinted character to the character pointer (2).


2. Gently push and pull the card framework (4) for the up-down position-selection of the card.


3. For the left-right selection of the card, move right can be finished by directly gently the framework (4); move left, you can gently depress the handle (5) (about at 15 degree), then reset, and the framework (4) can move one space left; after the above operations, the card can be set in the imprinted position.


4. The card imprinting is taken from left to right, it will automatically move one space left after each character is imprinted; press 3 for the blank.


5. Imprint the character: to operate the handle (5), push to down, and then reset.


6. If the imprinted character may be deeper or shallower, undesirable, then it can be adjusted by adjusting screw in the regulating port located in the bottom of the machine.


Regulation means: use the Z outside-hexagonal spanner along with the code sprinter to a little loose the hold-down nut, and then inside-hexagonal spanner with the code sprinter to adjust the middle regulating screw. Attention: turning the regulating screw in clockwise may deepen the typed characters while clockwise turning may lighten the typed characters. After finishing, please use the inside-hexagonal spanner with the code sprinter to make the regulating screw stable, and then use the Z outside-hexagonal spanner to fasten the hold-down screw.


Considerations:


1.Be sure to take great care of the pointing position of the row spacing ruler (2) when you beating code onto the cards. forbid press the handle(5) when the instructed region is not in the effectual region in order to avoid the stencil-piate to be damaged.


2.When you rotate the code disk.don`t press down the handle(5) for the fear of damaging the machine.


3. When you want to shifts the gears position, please note the exact orientation, if in the midway needs to replace, please use the left hand to block the card Framework(4) gently, in order to keep it in the time of conversion neutral card Framework (4) without moving;


4. Forbid strictlys hand or in other foreign matter insertion machine accidentally; strictly prohibit work without card on the machine.


5. When the machine is out of use, please move the card Framework (4) to the end of leftmost .

Quality Manual Dog Tag Embossing Machine For Military Army Use for sale
Send your message to this supplier
 
*From:
*To: Wuhan Jia Qirui Card Technology Co., Limited
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You may also be interested in :
Inquiry Cart 0
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Contact Us Quickly