Categories | Temperature Sensor |
---|---|
Place of Origin: | China |
Brand Name: | ArduPilot Mega ATMega2560 V1 |
Certification: | CE Rohs FCC |
Model Number: | ArduPilot Mega ATMega2560 V1 |
MOQ: | 5pcs |
Price: | 50 |
Packaging Details: | boxes |
Delivery Time: | 2-3 days |
Payment Terms: | TT advance paypal |
Supply Ability: | 10000 |
ArduPilot Mega ATMega2560 V1 Arduino Compatible
Description :
ArduPilot is a fully programmable autopilot that requires a GPS
module and IMU sensors to create a functioning Unmanned Aerial
Vehicle (UAV). The autopilot handles both stabilization and
navigation, eliminating the need for a separate stabilization
system. It also supports a "fly-by-wire" mode that can stabilize an
aircraft when flying manually under RC control, making it easier
and safer to fly. The hardware and software are all open source.
The board comes with all the surface-mount parts already soldered,
but requires the user to solder on connectors. Firmware is already
loaded, but the autopilot software must be downloaded and loaded
onto the board by the user. It can be programmed with the Arduino
IDE.
APM can be used for either airplanes or rotary wing aircraft,
including quadcopters and other multicopters and traditional
helicopters. The autopilot hardware is the same, and you can load
whichever firmware is appropriate for the aircraft you've got via
the free Mission Planner. (You may choose to add other sensors to
improve performance for specific airframes, such as an airspeed
sensor for airplanes or a magnetometer for mulitcopters). All
details and instructions can be found at each project's .
Features :
1,Designed to be used with autonomous aircraft, quadcopters and
helis.
2,Based on a 16MHz Atmega2560 processor.
3,Built-in hardware failsafe that uses a separate circuit
(multiplexer chip and ATMega328 processor) to transfer control from
the RC system to the autopilot and back again.
4,Includes ability to reboot the main processor in mid-flight.
5,Dual-processor design with 32 MIPS of onboard power.
6,Supports 3D waypoints and mission commands (limited only by
memory--approximately 600-700 waypoints with current code, but can
be adapted for more).
7,128k Flash Program Memory, 8K SRAM, 4K EEPROM.
8,Comes with a 6-pin GPS connector (EM406 style).
9,Has 16 spare analog inputs (with ADC on each) and 40 digital
input/outputs to add additional sensors.
10,Four dedicated serial ports for two-way telemetry (using
optional XBee modules) and expansion.
11,Can be powered by either the RC receiver or a separate battery.
12,Hardware-driven servo control, which means less processor
overhead, tighter response and no jitters.
13,Eight RC channels (including the autopilot on/off channel) can
be processed by the autopilot.
14,LEDs for power, failsafe status, autopilot status .
15,Dimensions: 40mm x 69mm.