FA-BM-SR300, SRS Fault Code Scan Tool And Airbag Reseter for BMW
1.Models available for most BMWs made between 1991 and 2003: However, from 1991 to 1993 the tool often will not work due to two
factors: BMW did not wire the SRS controllers to the main
diagnostic lines, and BMW did not cleanly phase out
the older 5WK4-025, 027 and 035 controllers (which it is not
compatible with.) Work via K line but NOT CAN BUS protocol.
2.Displays all SRS fault codes, tells you what's wrong.
3.Resets the "SRS" Light.
4.Very, very easy to use.
5.With user manual in the package, tell you how to use this item.
1.Read Airbag Faults:The tool automatically starts in the FA” mode
(though it won't read the fault codes until you press the ENTER”
button). When ENTER is pressed the first number shown will be the
correct code chart to use.
Note: If it shows "--". There are on codes to display. Pressing
ENTER a 2nd time will display the first fault code (see page 6 of
the manual for explanation.) To view the next fault press ENTER
again, and so on. At the end of the fault list the display will
show --”.Press ENTER to return to FA”. lf you encounter problems
see troubleshooting page 15.
2.Clear Airbag light / Faults:It is important what you know exactly
why the airbag light came on before resetting it always read the
code and look it up first.
WARNING: Do NOT proceed with reset until taking appropriate action
to diagnose, understand and solve the problem with the airbag system.
1.Tool for BMW
2.Hardcopy user manual